(1)电子板尺寸: 限度为:457*356mm最小限度为: 80*50mm
(2)零件:Tape,stick feeder: 限度为.74 slots Tray: 10types
(3)贴装速度:最快射击速度为0.7sec/shot(使用4种不同吸咀) 4.0sec/shot(tray component)注意:零件形状会影响设置速度
(4)精确度:+/-0.05 mm for 4-sided parts with at least 48 leads +/-0.1mm for other parts
(5)设备处理器:F4G & MCS30 & FLEXA
(6)电源: 3-phase,200 to 480 VAC,3.0KVA
(7)空气消耗量:0.5 Mpa(5kgf/cm2),60NI/min
(90 NI/5sec during tray discharge)
(8)机器制造尺寸:
长: 2,940mm (extra 374 mm with MTU)
宽: 1,644mm (including fencings)
高: 1,725mm (excluding signal tower)
(9)重量:约3500kg
With MTU:大约4,250kg
