Automatic PCB board face clean machine applicable Yu Zaixi paste or glue coating before online cleaning small plate on the surface of the PCB pad dust, dirt, fibers, hair, skin elastic, metal particles, such as foreign body, ensure the cleaning of the PCB surface, in advance to eliminate virtual welding, welding, camber and deflection etc. Bad welding, thus reducing the hidden trouble, improve product quality. Develop and design special equipment for PCB cleaning of SMT production line. Standard equipped with electrostatic function, completely eliminate static interference. Contact cleaning method, the cleaning rate is more than 99%, to ensure high efficiency, stability, lasting cleaning effect.
II. Equipment Specifications:
Remarks on project VW-300 specifications/parameters
PCB size 50X50 ~ 300X300 (LXW)mm large substrate corresponding to other models
The thickness of PCB is 0.5~5mm and the substrate below 0.4mm is specially corresponding
Transmission height 900±25 mm
Cleaning brush 1
1 set of vacuum suction device
Adhesive dust roller two before and after
A roll of sticky paper
Orbit direction left → right or right → left is optional
Track fixed edge front fixed or rear fixed optional
Track width adjustment manual automatic track width adjustment optional
Electrostatic removing device is equipped with special electrostatic removing device
Air 0.4 0.5 MPa
Power supply AC220V,50HZ 500W special voltage needs to be specified
Overall dimension (mm) 890X600X1400
Weight 140 kg
III. Operating principle of the equipment:
