| 回流焊參數 |
| 型號 MODEL |
VS-800II / NS-800II |
VS-1000II / NS-1000II |
VS-800IIX / NS-800IIX |
VS-1000IIX / NS-1000IIX |
| 機體參數 GENERAL |
|
|
|
|
| 外型尺寸(L*W*H) Outside Dimension(L*W*H) |
5310x1353x1490mm |
6100x1353x1490mm |
5310x1580x1490mm |
6100x1580x1490mm |
| 顏色 Standard Color |
計算機灰 Computer Grey |
計算機灰 Computer Grey |
計算機灰 Computer Grey |
計算機灰 Computer Grey |
| 重量 Weight |
Approx.2250KG |
Approx.2450KG |
Approx.2350KG |
Approx.2550KG |
| 加熱區數量 Number Of Heating Zones |
上Up8/下Bottom8 |
上Up10/下Bottom10 |
上Up8/下Bottom8 |
上Up10/下Bottom10 |
| 加熱區長度 Length Of Heating Zones |
3121mm |
3891mm |
3121mm |
3891mm |
| 冷卻區數量 Number Of Cooling Zones |
2(內置) |
| 排風量要求 Exhaust Volume |
10 M3 / min x 2 (通道) Exhausts |
| 控制部分參數 Standard Feature Of Control System |
| 電氣要求 Electric Supply Required |
3 phase,380V 50/60Hz(optional: 3 phase,220V 50/60Hz 選配) |
| 電源功率要求 Electric Power Required |
64KW |
80KW |
64KW |
80KW |
| 啟動功率 Power For Warm Up |
30KW |
36KW |
32KW |
38KW |
| 正常功率消耗 Power Consumption |
11KW |
13KW |
12KW |
14KW |
| 升溫時間 Warming Time |
約 Approx.25 minute |
約 Approx.35 minute |
| 溫度控制範圍 Temp. Setting Range |
室溫 Room Temp. --- 300℃ |
| 溫度控制方式 Temperature Control Method |
PID閉環控制 + SSR驅動 / PID Close Loop Control + SSR Driving |
| 溫度控制精度 Temperature Control Precision |
± 1.0℃ |
| PCB板溫分布偏差 Temperature Deviation on PCB |
± 1.5℃ (by JT Board Test Standard) |
| 加熱器 Heating Element |
Especial Heating elements For Long Life ; 特製的特長壽命加熱器 |
| Commutated Element 整流板結構 |
Aluminium Alloy Plate 鋁板 |
Max. Temp. Gap Between Preheat & Reflow Setting
預熱區和焊接區之間的 溫度設定差值 |
80℃ |
Max. Temp. Gap Between Preheat Zones Setting
預熱區之間的 溫度設定差值 |
40℃ |
Max. Temp. Gap Between Reflow Zones Setting
焊接區之間的 溫度設定差值 |
50℃ |
| 參數存儲 Data Storage |
可存多種生產設置參數與狀況 Process Data and Status Storage (80GB) |
| 異常報警 Abnormal Alarm |
溫度異常（恆溫后超高溫或超低溫）Abnormal Temperature (Extra-high / Extra-low Temp.) |
| 掉板報警 Board Dropped Alarm |
三色信號燈: 黃-升溫；綠-恆溫；紅-異常 Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal |
| 運輸參數 Standard Features Of Conveyor System |
|
| 導軌數量 |
1 Lane |
2 Lanes |
| Rail Structure 導軌結構 |
Subsection Integrated Type 整體分段式 Subsection Separate Control分段獨立控制(Option選配) |
| PCB 寬度 Max.Width Of PCB |
400mm (Option:610mm 選項) |
A and B lanes width each 250mm or 1 lane 450mm and other lane 50mm |
| 導軌調寬範圍/調寬形式 |
50--400mm(Option:50--610mm 選項)/電動 Motorized |
50--450mm/電動 Motorized |
(相關A、B線的寬度組合請參考上一欄) |
| Range Of Rail Width/Adjustment |
(Width relate to A&B, please refer item above) |
| 部品高度 Components Clearance |
PCB板上/下各25mm , Top/ Bottom Clearance of PCB is 25mm |
| 運輸方向 Converyor Direction |
左向右(選配: 右向左) L→R (Option: R→L) |
| 運輸導軌固定方式 Fixed Rail Side |
前端固定(選配:后端固定)Front Rail Fixed(Option:Rear Rail Fixed) |
前後導軌固定，中央兩條活動. Front and Rear Rails Fixed, 2 adjustable Rail at central. |
| PCB運輸方式 PCB Transmission Agent |
空氣爐 Air-Reflow = 鏈條+網帶 Chain + Mesh , 氮氣爐 N2-Reflow = 鏈條 Chain (可選配網帶 Mesh is option) |
|
|
|
| 中央支撐 Center Support (選配 Option) |
防止PCB板因過寬及元器件過重而彎曲變形 Preventing PCB warp such too wide and heavy component load |
| 運輸帶高度 Converyor Height |
900±20mm |
| 運輸速度 Converyor Speed Range |
300～2000mm/min |
| Lubrication Auto-Afflux 潤滑油自動加註 |
Standard |
| 回流熱工學管理分析 Thermal Management System and Analysis System |
|
| KIC RPI焊接質量檢測系統 KIC RPI Reflow Process Inspection |
只標配于VS系列 , Standard for VS-series only |
Temp. Thermocouple Slot
溫度曲線測試線 |
4 |
Electrical Driven Top Hood Opening
電動打開上溫區蓋 |
標準配置 Standard |
Operation Mode: Operate / Demo / Edit
三種操作模式: 運行/演示/編輯 |
標準配置 Standard |
| On Line Editing 在線編輯功能 |
標準配置 Standard |
| Cooling Method 冷卻方式 |
Forced-Air 空氣冷卻 (標配Standard), Water-Chiller 冷水冷卻(選配Option) |
| 帶氮氣系統機型 Model for Nitrogen Process |
VS-800II-N / NS-800II-N |
VS-1000II-N / NS-1000II-N |
VS-800IIX-N / NS-800IIX-N |
VS-1000IIX-N / NS-1000IIX-N |
| 電源功率要求 Electric Power Required |
67KW |
83KW |
67KW |
83KW |
| 啟動功率 Power For Warm Up |
32KW |
38KW |
34KW |
40KW |
| 正常功率消耗 Power Consumption |
13KW |
15KW |
14KW |
16KW |
| 正常耗氮量 Nitrogen Consumption |
20M3/hr. @ 300ppm~1000ppm (O2濃度 / O2 Concentration) ; 氮氣流量計 with N2 Flow Rate Meter |
| 助焊劑管理 Flux Management System |
氮氣爐膛標配空氣循環過濾，優化爐內環境，易於維護保養。Flux Reclaimed and Filtration standard for N2 Oven, easy clean-up. |
N2 containment at Entry and Exit End
入口及出囗氮氣保護裝置 |
標準配置 Standard |
Flux Reclaim System
助焊劑回收系統 |
標準配置 Standard |
| Nitrogen Flow Meter 氮氣流量計 |
標準配置 Standard |
| Oxygen Analyser 氧氣分析儀 |
選配 Option |
Nitrogen Consumption [Standard]
氮氣消耗量 (標準) |
400~1000PPM 20M³/H |
Nitrogen consumption [Dilated hearth]
氮氣消耗量 (加寬機) |
500~1000PPM 25~30M³/H |
| 冷水機 Water Chiller |
3 HP ; 外置式 External Stand-alone Type ; 充足冷卻能力滿足無鉛工藝要求 Powerful Cooling suit to Lead-Free Process Required |
| 註明：氮氣機在尾號為"-N"的設備纔是標配 , Standard for N2 Oven Model With suffix of "-N" |
